Sophos will be on the RAID 1 set-up (50GB) Lexar 32GB JumpDrive P20 USB 3.0 Flash Drive, Speed Up to 400MB/s (LJDP20-32GCRBNA) (already own)Ģ x Intel® SSD DC S3520 Series (240GB, 2.5in SATA 6Gb/s, 3D1, MLC) - (plan to buy)Ĭurrently at 40% capacity, with limited growth expectedĮSXi VM data store will be on a RAID 1 volume (MFBU will provide power loss protect for 512MB RAM cache on RAID card) on two Intel DC s3520's (redundancy on super-capacitor power protected drives)įreeNAS will be installed with the 8 port 2008 LSI based IT mode card in pass-through PCI-E Supermicro LSI 2008 SATA/SAS card in IT mode (already own)Ģ Port Mellanox ConnectX 10G (plan to buy, appears ESXI and Sophis UTM both support)Ģ x Finistar 10G optical transceiver (plan to buy)Įbay 1GBE Copper transceiver (plan to buy) Intel® Xeon® Processor E3-1281 v3 - (already own)Ģ x Crucial 16GB (2 x 8GB) 240-Pin DDR3 SDRAM ECC Unbuffered DDR3L 1600 (PC3L 12800) Server Memory Model CT2KIT102472BD160B (already own) Proprietaty LSI add-on card provides RAID 1 (already own) with MFBU (will consider buying) Intel® Server Board S1200V3RPL - (already own) As such, I'm preparing to migrate my existing FreeNAS and Sophos UTM from two discreet machines to a single all-in-one set-up. My Sophos instance has been running reliably on ESXI for over a year, and I feel comfortable adding more pieces at this stage. I'd like to stay with FreeNAS for storage, although I'm not keen on using it as a hypervisor for other OSes. I've been using FreeNAS for the past three years, and was on Nexenta before then. Sophos UTM has been great, and I'd like to continue using it to secure our home network, and use the web server protection feature to secure a NextCloud instance. My usage is fairly low, and consists of two full time users with limited data storage needs. I know, I know, AIO, a risky idea with ZFS, but I really think it will be fine. Similarly, we can set rules for other services and ports.I'm considering moving to an all-in-one set-up for my current FreeNAS installation. We set up port 80 of our public IP address to forward to port 80 of our server on the local network. In the example above, the addressing of the server’s subnet is different than the IP address of the physical port, so don’t forget to set the appropriate routing. Sophos XG Firewall setting an HTTP redirect rule.in Forward section in Protected server(s), select the previously created IP host and Mapped port should be set to service port.Destination host/network set to the physical port with the set IP address to which the ISP redirects our external IP address and in Services we select the service that we allow.Source zones and Allowed client network on Any unless you want to allow only certain networks.Rule group can be left on Automatic or select as below.Application template from DNAT/Full NAT/Load Balancing.Nextly, we create a firewall rule from the Firewall menu, select Add firewall rule and Business application rule, and then: To do this, go to Hosts and Services and then to the IP host tab and click the Add button. I will only show you how to redirect your public IP address to the address of the server located in the LAN, as I have done in my case and thanks to that you can read my blog □įirstly, we will create a host that will be used in the firewall rule that handles redirection. Maybe I will not describe how to configure Sophos XG Firewall, because many tutorials can be found on the Internet and it is also quite intuitive. After several years of working with these devices, I wanted to set something like this at home and found a free Sophos home solution. After a short analysis, it turned out that it is a new generation of firewall with an extensive security system and many other network functions. The adventure with UTM devices began many years ago, when the name FortiGate appeared in the specification during one of the implementations.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |